Love Graphic Art Alcohol Ink Tutorial

The word LOVE is one that I come back to over and over in my art, it's so simple, yet so meaninful, all in 4 simple letters. I hope to share many more of my "Love" pieces as I get more into the revitalization of this blog. So here is the "How To" on this piece.

First off, here is the YouTube Video tutorial if you are a visual learner. 

Supplies:

• Kilz2 Primer - I get this at Home Depot
• Framed Wall Art to repuprose Unfinished Wood Art Panel - From Michaels 
• Heat Gun
• Oracal 651 Vinyl
• Transfer Tape
• Silicone Tool
• 91-99% Isopropyl Alcohol - This is dirt cheap at Walmart or any drug store
• Krylon Kamar Varnish
• Krylon UV Spray
• Ranger Tim Holtz Alcohol Ink
• Pinata Brass

This piece started it's life as an innocent framed wall art for a child's room. I found it on clearance for under $2.50, so I decided to repurpose it. 

I taped off the frame and covered the picture with Kilz2 Primer. This took several coats and it was pretty time consuming. But I figure it was a trade off between time/money to get a low cost framed wall art "canvas". I put canvas in quotes because this is not a canvas, it's a wood board. I have tried using alcohol ink on an actual canvas quite a bit. Even when it is primed or gesso'ed, it doesn't not work well, The ink immediately soaks into the material. It especially doesn't work well if your are trying to use a stencil to mask off any area. The ink will just seep under that stencil. Alcohol ink does have a fun affect on canvas if you are just looking to color the canvas, but this project will not work on a canvas. See my last post if you need an alternate "canvas" to work with.

Next, I went to the computer and made the Love cutout. If you don't want to make your own, feel free to right click on the image above and save it. 

 I used a square and changed the settings to the size of my canvas. Then I used a text layer with the font Postino for the word love. I sized it to fit on the canvas nicely, centered it, selected both layers and sliced the Love out of the rectangle layer. I cut this on my Cricut using Oracal 651 vinyl. This is the best vinyl to use for stenciling to mask alcohol ink, I have tried several different and come to the conclusion that this is the best vinyl to get this job done.

Once the vinyl was cut out I weeded the letters out to work with the negative space vinyl. Using transfer tape I applied it to the canvas, making sure to press down around all of the edges. I hit all of the vinyl with a heat gun as well to make sure it's adhered really well.

This next step is the most important part! After the vinyl is applied, I go over all of it with a generous coat of Kilz2 Primer. I make sure to brush it towards the vinyl so that the primer will seep in under any tiny gaps that might allow the alcohol ink to seep through. I let that coat dry for 30 mins to an hour, depending on how patient I am. After that is dry you are ready to make some art!

I decided to work with red, pink and purples for this piece. I started from left to right, working each color separately, letting each color overlap and blend a bit with the color before. See the video for a look at how the ink application technique.

Once I worked all of the colors I let it dry for just a few minutes. Alcohol inks don't take too long to dry, so it's really just a matter of making sure none of the inks are still tacky. Once it's all dry, pull off the vinyl and reveal your artwork!

If any of the ink seeped under the vinyl use a q-tip with alcohol to carefully wipe away the alcohol. If that doesn't get up all of the ink you can do some touchups with the primer, some colors can be harder to cover up than others. That's why I always try to avoid having any seepage if I can!

 I then apply 3 light coats of Kamar Varnish and 3 light coats of UV protectant spray to seal the inks and make sure they won't fade over time. Lastly, I remove the tape from the frame an it's done! 

Here is the another variation of colors that I tried. This one ended up with a lot of seepage that I couldn't cover, so it ultimately got painted over and I tried again. As I said, I've tried several different vinyls before I came up with the right materials and techniques to get good results. This one was part of that trial and error. 

Comment if you have any questions! Feel free to subscribe to my YouTube or TikTok and follow along to see where my crafting takes me next!

NYC Graphic Art Tutorial

 My kids' high school was putting on Annie the Musical and they needed some raffle items for the intermission fundraiser. I always make something inspired by the production they are putting on. After days of the song "N- Y- C- just got here this morning..." I was inspired to make this alcohol ink graphic art piece. It turned out phenomenally and I'm so happy with it. It was hard to part with, so I might just make a new one soon!

Here is a quick tutorial on how I brought this beauty to life.

First off Supplies:

• Kilz2 Primer - I get this at Home Depot
• Unfinished Wood Art Panel - From Michaels
• Heat Gun
• Oracal 651 Vinyl
• Transfer Tape
• Silicone Tool
• 91-99% Isopropyl Alcohol - This is dirt cheap at Walmart or any drug store
• Picture Frame (if desired)
• Krylon Kamar Varnish
• Krylon UV Spray

Alcohol Ink colors used in this video:

• Tim Holtz Ranger Glacier
• Tim Holtz Ranger Monsoon
• Tim Holtz Ranger Sailboat Blue
• Tim Holtz Ranger Alloy Sterling

(these can be purchased on Amazon individually, but I've had the best luck buying that at Michael's or in sets with all of the colors online).

I will give a quick run down of the the steps, but please watch the video of how this was created here:

YouTube Video

I started off with the wood panels from Michaels and gave them each 3 coats of Kilz 2 Primer. I like working with these wood panels because they are precut to the standard picture sizes, so they will fit in most (not all) picture frames if you take out the glass. They also come sanded and ready to go, and the price isn't too bad either!

I've included the steps on how to create the graphic in Cricut Design Space for you in case you want to make it your own. But if you like what I have, and aren't feeling like recreating the wheel here is the NYC graphic. Just right click the image and save it, the upload it into Cricut Design Space or whatever cutting machine software you are using.

I use Oracal 651 vinyl as the stencil because I have found I have the best luck with this vinyl at creating a good mask and not getting any seepage under the vinyl. 

An additional step I take is applying another coat of Kilz2 after I've applied the vinyl to the surface. This allows the Kilz to seep into any of the microscopic gaps and dry, creating a blockage for any of the inks that might try and finds it's way under the vinyl. 

When adding the alcohol ink, it's really best to just play with the inks for a while and see what you like. Everyone eventually comes up with their own technique for what they like. The key is to move the ink and alcohol around until the alcohol evaporates to get the cool alcohol ink effects. Check out my YouTube for more videos on my alcohol ink tutorials.

I apply the inks right over the vinyl and the Kilz, let everything dry then slowly peel up the vinyl to reveal the design. If any of the ink did seep through, you can first try to wipe it up carefully with isopropyl alcohol and a qtip or cotton swab. Be very careful not to touch the the design with the swab or a finger covered in alcohol. The inks are touch proof at this point, but they are not alcohol or scratch proof yet!

To seal the picture I always use Krylon Kamar Varnish, 3 quick coats, with 15 minute dry time in between. Alcohol inks are very prone to fade in the sunlight so I also add Krylon UV resistant spray, 3 coats as well. It's important that you use the Kamar Varnish BEFORE the UV the spray. The UV spray will reactivate the inks if they are not sealed first (I may have learned this the hard way!) 

I found this frame in my supplies that fit the board perfectly. The wood panel won't fit in all frames, so make sure you check the actual measurements of the frame before you buy it. I remove the glass insert the wood. And there you have it! 

Please comment if you have any questions. I'm always happy to help. Feel free to follow me here or on YouTube as well!

Crescent Moon Cat Ornament Wreath

 There's something about a kitty playing with an ornament that is maddening and adorable all at once. I saw a Christmas wreath a few years ago that was a cat reaching for an ornament and I knew I had to make something similar. The inspiration hit around Halloween time, so I put a little spooky, black cat, crescent moon twist on it.

 

Everything supply needed for this was from the Dollar Tree except the yarn and the cardboard I used for the cat, but you could totally use some Just Chenille black yarn from Dollar Tree as well.  

Supplies:

Dollar Tree wreath form 18" or smaller if preferred

Black Yarn, the thicker the better

Cardboard/Chipboard - cereal box is the best consistency or you can buy chipboard on Amazon

Any floral pieces you like

Floral wire

Ornament

Ribbon or thread to affix the ornament

Tools:

Cricut -or other cutting machine to cut the Cat shape 

Bolt cutters or wire cutters- whatever can cut the thickness of the wreath form

Here is the cat graphic I used for cutting the image. I used two layers of chipboard and hot glued them together to make it sturdy.

Here is a video tutorial for the whole process. Have fun with this and put your own little flare on it!

<iframe width="560" height="315" src="https://www.youtube.com/embed/W_PAgF5Kh1I?si=CQEuJ57Jd7D9vnDR" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share" allowfullscreen></iframe>

If you like this content, feel free to follow me here and on YouTube. I'll be sharing a lot more crafts. 

And if there are any crafts you want to see created, drop me a comment and I'll see what I can do to create a tutorial for it!